Follow

Holes & Grooving

To enable the holes and/or grooving fields on a panel you need to be on the "Business Edition" of MaxCut.

When you add an input panel check the “Show Holes” and “Show Grooving” check boxes in the bottom right of the window.

Holes_and_Grooving.png

To specify holes  see more information on how to specify holes on a panel

Likewise, to specify grooving see more information on how to specify grooving on a panel

9 Comments

  • Avatar
    ajay lakra

    holes ditel is not come

  • Avatar
    John Palmer

    I don't understand you question. Please can you provide further detail and information on it

  • Avatar
    dancopro

    how do I add pricing per pot hole

  • Avatar
    John Palmer

    Hi,

    Unfortunately the software does not accommodate a price per hole to be added.

  • Avatar
    Edoardo

    Hi, im trying to make some holes at my panel, but when i activate holes i cant write the corrdinates. Its disable the box to write it.

  • Avatar
    Edoardo

  • Avatar
    John Palmer

    Hi Edoardo,

    The Holes and Grooving features are only available to business edition users. To enable this feature, please upgrade to the business edition.

  • Avatar
    nourhan

    how to center the groove not to make it from right to left for example if the panel 25cm and the groove 15cm I want it to be in the middle not attached to the right or the left?

  • Avatar
    John Palmer

    To center it, you would need to do a manual calculation of where the centre of the board is to place the groove on. So in the example, if your panel was 25cm wide and the width of the groove was 15cm, you would place the groove at 12.5cm with a width of 15cm.

    So once you know where you want the placing of the groove, you would input that in the Panel Details window.  Here is a tutorial on how to input the relevant groove information in to MaxCut:

    https://support.maxcutsoftware.com/hc/en-us/articles/360015947734-Grooving-on-Panels

Please sign in to leave a comment.
Powered by Zendesk